The spots have been especially developed for the use in Wellness areas and steam rooms. The protection class is IP67 and they are operated with low voltage. Furthermore the light bulb can be exchanged easily when the spots are already installed and sealed in. The spots are available in LED RGB, RGBW or warm white. As the spots are prepared with plug ready to use, an easy and trouble free installation is ensured.
Technical Data:
Control signal RGB/RGBW/warm white: 350 mA constant current
Power supply RGB/RGBW/warm white: 3 x 1 W / 4 x 1 W / 1 W
Light colours RGB: Red/Green/Blue
Light colours RGBW: Red/Green/Blue/Warm White
Light colours warm white: warm white 2700°K
Installation boring: 42 mm
Weight: app. 0,25 kg
Installation depth: 55 mm or 125 mm (depending on the mounting sleeve)
Diameter of the cover: 60 mm
Protection class: IP67
Scope of delivery: System for pre-coated, GFK or Aluminum surface:
LED spots RGB or warm white IP65 brassl chrome plated, stainless steel or alu coated (color on demand), lense beamless
Installation boring 42 mm
Cover 60 mm outer diameter
Incl. connection cable 20 cm JST
Mounting sleeve D 42 x 110 (40) mm with counter nut (to be ordered separately)
System for tiled surfaces:
LED spots RGB or warm whtie IP65 brass chrome plated, stainless steel or alu coated (color on demand), lense beamless
Installation boring 42 mm
Cover 60 mm outer diameter
Incl. connection cable 20 cm JST
Mounting sleeve D 42 x 110 (40) mm with sealing flange (to be ordered separately)
Accessories/ Options
The spots are connected in series. For the connection of the single spots there are extension cables available: 1,5 - 2,5 - 5,0 - 7,0 - 15,0 m
Available for control signal 700 mA constant current
Controller for LED spots RGB / RGBW
Controller for LED spots RGB with an operation current of 350 mA. You can connect up to 10 pieces of RGB or RGBW spots to one controller. The controller can realise realise six (respectively seven at RGBW) static light colours and nine (respectively eight at RGBW) light programmes. The different light programmes are set by a code switch at the housing. Optionally the light programmes can be controlled externally by a four-digit digital code. The connected spotlights can be dimmed by a second poti at the control housing. If more than 10 spots are required the controllers can be extended by Slave modules.
Technical Data:
Electrical supply RGB/RGBW: 230 V (50-60 Hz)
Power supply RGB/RGBW: 42 VA
temperature range RGB/RGBW: 0 to +50 °C
Weight RGB/RGBW: 1,5 kg / 2,7 kg
Dimensions (W/H/D) RGB: 130 x 180 x 90 mm
Dimensions (W/H/D) RGBW: 200 x 250 x 120 mm
Scope of delivery:
LED RGB or RGBW control board installed in housing
Code switch for the setting of the desired light programme
7 m cable from the controller to the 1st spot
Poti for the manual dimming of the connected spotlights
1,5 m power supply cable with Euro plug
Accessories/ Options:
Available with operation- / constant current 700 mA
Slave controller for external control / colour choice by a 4 digit HEX Code
Transformer for LED spots warm white
Transformer for LED spots warm white with an operation current of 350 mA. You can connect up to 6 pieces of 1 W spots to one transformer (to dimming transformer up to 10 spots).The transformer can be used for warm white or for the RGB spots. The setting of light colors is provided on the wiring (standard warm white). The possible dimming can be connected by a poti at the control housing, or by external 1-10 V dimming signal. If more than 6 respectively 15 spots are required, a second light circuit has to be installed.
Technical Data:
Electrical supply: 230 V/AC 50-60 Hz
Power supply for Dimmable transformer: 42 VA
Power supply for Non-dimmable transformer: 9 VA
Temperature range: 0 to +50 °C
Weight for Dimmable transformer: 1,2 kg
Weight for Non-dimmable transformer: 0,46 kg
Dimensions (W/H/D) for Dimmable transformer: 130 x 230 x 110 mm
Dimensions (W/H/D) for Non-dimmable transformer: 100 x 80 x 65 mm
Scope of delivery:
Transformer installed in housing
Poti for the manual dimming or terminal for external dimming signal of the connected spotlights (at option dimmable transformer)
7 m cable from the controller to the 1st spot
1,5 m power supply cable with Euro plug
Linelights Helliflex Midi
Flexible LED strip with an operation voltage of 24 V-DC, available in LED RGB, RGBW or warm white. The stripcan be either installed with holding brackets (e.g. if installed in wooden cabinets) or with a mounting profile (e.g. if installed under the benches of steam rooms). The Helliflex system is prepared with a double-sided adhesive tape on the backside and available in different standard lengths. The lengths is adaptable on site. Therefore, a protection cap made of transparent silicon is included in the scope of delivery.
Technical Data:
Control signal RGB/RGBW: 24 V-DC RGB - / com +
Control signal Warm White: 24 V-DC
Light colour RGB: Red/Green/Blue
Light colour RGBW: Red/Green/Blue/Warm White
Light colour Warm White: Warm White 2700 K
Dimensions (W/H/L) RGB: 13 x 5 mm x length
Dimensions (W/H/L) RGBW: 15 x 5 mm x length
Dimensions (W/H/L) Warm white: 11 x 5 mm x length
Temperature range: -20 to +60 °C
Protection class: IP68
Scope of delivery:
LED light strip, casted in 2-components resin with 4 m cable and AMP plug
Protection cap for adaption of the length on site
Accessories/ Options:
Recommendation: Aluminium installation profile 17 x 5 mm - available in pieces of 2 or 3 m
Holding brackets for Helliflex-Midi
Linelights / Light rails
LED linelights with an operation voltage of 12 V-DC, available in LED RGB or warm white. Ideal for indirect illumination or illumination under the benches of steam rooms in casted version with 12 x 12 mm Aluminium profile. The Linelights are produced to order in the desired lengths.
Technical Data:
Control signal RGB: 12 V-DC RGB - / com +
Control signal Warm White: 12 V-DC
Light colour RGB: Red/Green/Blue
Light colour Warm White: Warm White 2700 K
Dimensions (W/H/L): 12 x 12 mm x length
Temperature range: -20 to +60 °C
Protection class: IP65
Scope of delivery: LED- Linelight Aluprofile IP65 • Equipped with SMD-LEDs, catsed with transparent 2-component resin • Incl. connection cable and plug • Available lengths from 119 mm up to 3000 mm
Accessories/ Options:
Extension cables incl. connector
Y-cable 4-poles incl. connector
Controller for LED linelights RGB / RGBW
Controller for LED-RGB linelights with a working voltage of 12 V/DC. You can connect up to 105 W of RGB- or 180 W of RGBW linelights to one controller. The controller can realise six (respectively seven at RGBW) static light colours and nine (respectively eight at RGBW) light programmes. The different light programmes are set by a code switch at the housing. Optionally the light programmes can be controlled externally by a four-digit digital code. The connected lights can be dimmed by a second poti at the control housing. If more than 105 W RGB respectively 180 W RGBW are required the controllers can be extended by Slave modules.
Example photo: RGBW controller without code switch and without dim poti
Technical Data:
Electrical supply: 230 V (50-60 Hz)
Power supply RGB / RGBW: 150 VA / 180 VA
Temperature range: 0 to +50 °C
Weight RGB / RGBW: 2,8 kg / 2,7 kg
Dimensions (W/H/D) RGB: 260 x 220 x 110 mm
Dimensions (W/H/D) RGBW: 200 x 250 x 120 mm
Scope of delivery:
LED RGB control board installed in housing
Code switch for the setting of the desired light programme
Poti for the manual dimming of the connected spotlights
7 m cable from the controller to the 1st Line Light
1,5 m power supply cable with Euro plug
Accessories/ Options:
Available with operation voltage 24 V-DC
Transfomer for warm white
Slave controller for external control / colour choice by a 4 digit HEX Code