The Steam Impact is a unique experience for steam rooms. This "air shower" blows compressed air into the steam room through nozzles. The air nozzles are installed in the cabin ceiling over the seats. The incoming compressed air blows the hot air layers under the cabin ceiling onto the guests below. For the bather the effect feels like a sauna splash and offers a unique experience. The Steam Impact consists of a pneumatic controller, an oil-free compressor with an expansion tank, buttons and nozzles.
Technical Data
Electrical supply: 230 V/AC 50 Hz;
Power supply: 550 W (incl. 450 W compressor);
Control panel 1 and 2 fold
Dimensions (W/H/D): 500 x 500 x 450 mm;
Weight: app. 7,5 kg
Control panel 3 and 4 fold
Dimensions (W/H/D): 650 x 500 x 450 mm;
Weight: app. 9,5 kg;
Scope of delivery A complete package for a Steam Impact consists of the following components: Electronic and pneumatic control panel consisting of:
Controller CB36 with LC Display installed in housing
Power socket for the connection of the compressor
Completely tubed and pre-wired on PP board grey
Ball valve ½"
Pneumatic pressure gauge with water separator
Connection compressed air-buffer tank
Connection compressed air-compressor
Solenoid valve(s) complying with the number of nozzles/seats
Stainless steel pressure tank
with diaphragm 20 l, pre-mounted on the backside of the PP board
Weight 5,5 kg
Oil-free compressor
230V / 50 Hz (60 Hz),
Performance 49 l/min at 5 bar
Drive power 0,45 kW, pressure tank 10 l
Control valve 1/8" - open electroless
Measurements 360 (W) x 390 (L) x 420 (H) mm
Weight: 17 kg, Sound: 58 dB(A)
Push button plate 1 fold
With bonnet for for in-wall mounting and name plate for the start of the programme (quantity complies with the number of nozzles/seats)
Drizzle Nozzle
Quantity complies with the number of nozzles/seats
To be provided by the builder
Plants room for the installation of the control panels
Power socket 230V/ 50 Hz
Air tubes to the nozzles (according to the no. of seats in the cabinet)
Temperature range in plants room: +5 to +40 °C
Humidity in plants room: max. 80% rel. humidity
Due to the noise emission of the compressor we recommend to do a noise damping installation