The SOLFOG generates a very fine, dry fog made of ultrapure brine solution by a ultrasonic fog maker. This dense fog is delivered to the room through an airstream that is produced in the unit. Thereby a salty sea climate is created in the according room. The dosing capacity is sufficient for rooms with a floor space of app. 25 m² (depending on the air change). The brine solution is primed out of an air sealed bag (Politainer). This bag interfolds when the liquid brine solution is taken out. This procedure prevents the contamination of the solution with germs of the ambient air. A salty room climate is said to support the healing process in case of respiratory problems and skin diseases. Additionally the according room can be aromatised by the system. For this reason aroma oil concentrate is evaporated in the system and the aromatised air is blown into the room together with the salty fog. Operation and visualisation via 5-line LC display and three buttons. Fault indications are displayed in plain text. The SOLFOG has three operation modes: cyclic operation, push-button operation or external control.
Technical Data
Area of application: Relax room, infrared sauna, salt room with a floor space of app. 25 m² (depending on air exchange rate);
Electrical supply: 230 V / 50-60 Hz;
Power supply: 50 W;
Dimensions (W/H/D): 400 x 700 x 250 mm;
Empty weight/ operational weight: app. 11 kg / 26 kg;
Temperature range: +10°C until +35°C;
Protection class: IP44;
Brine consumption at app. 10 h operation/day (system settings 10 min. pause/10 sec. dosing): app. 0,2 l / day;
Connection fog tube: d 40 mm;
Input for external control: non-volt or mains voltage;
Output for fault indication: non-volt contact
Scope of delivery
Controller CB36 with 5-line LC display installed in housing
Peristaltic pump SA for brine re-feeding
Ventilator
Ultra sonic fog maker
Fog chamber
Mounting board with console for brine bag max 5 l
Disinfection set with disinfection tablet, mixing bottle and recipient
5 l sterile brine solution in politainer (resp. 1 l for private use)
Inlet nozzle PVC D40 with cover screen
To be provided by the builder
Plants room for the installation of system
Power socket
Tubing in PVC(C) to the room
Points to be considered before the installation:
Before the installation of a SOLFOG all materials have to be checked on their corrosion resistance against the saline climate, even the ventilation pipework.
The SOLFOG is not licensed for medical purpose.
Use only pure, disinfected WDT brine solution with a salt concentration of app. 5%. WDT brine solution is delivered in a sterile condition in a closed bag. Outstanding brine solution is affected by bacterial impact and so should not be used.
The SOLFOG is only useful for rooms with a max. temperature of app. 60°C