The programme is activated by a push-button. The guest has the choice between a cold or warm water treatment. After pressing the button the filling of the basin starts. It stops when an adjustable water level is reached. Then the bubbling starts automatically for a programmable time. After the lapse of this time the bubbling stops and a dwell time follows. Afterwards the basin is emptied automatically. During the dwell time the bubbling can be restarted before the emptying. During the filling procedure a chlorine solution is dosed to disinfect the whole system (drain-, air piping and basin) and the feet of the user. Both basins can be operated independent from each other.
Technical Data:
CONTROLLER
Electrical supply: 230 V/AC 50 Hz;
Power supply: max. 600 W;
Dimensions (W/H/D): 500 x 400 x 150 mm;
Weight: 4 kg;
WATER PART
Water supply: 2 x 1" female thread;
Outlet to the 2 basins: 4 x solenoid valve 3/4";
Dimensions (W/H/D): 500 x 500 x 150 mm;
Weight: 10 kg;
Water consumption according to basins dimensions!
Scope of delivery
Controllerconsisting of:
2 x Micro processor controller in housing
Potis for the adjustment of the single parameters (Sputtering time, dwell time...)
2 x Pressure switch and 2 x pressure measuring device for the regulation of the water level
Completely pre-wired on PP board grey
Water partconsisting of:
2 x supply (warm/ cold) with pre-filter and ball valve 1" female thread
Thermo mixer JRG 1" with non-return valves
4 x outlet with solenoid valve 3/4" and screwing for the filling
Completely tubed and pre-wired on PP board grey
2 x Push button plate 2 fold with bonnet for flush mounting and name plates for the start of the programme
2 x Peristaltic pump with console and bottle 1,5 l for the disinfection incl. dosing tube and dosing valve
2 x Side channel vacuum blower, 0.20 kW 230 V - 50 HZ, IP55 for sputtering effect
2 x Motor-ball valve 2-ways PVC DN32 PTFE/EPM 230 VAC D40 S6 max. 3,5 bar for the automatical drainage of the basin
To be provided by the builder
Plants room for the installation of the control panels
Power socket 230 V / 50 Hz
Water connection cold 1"
Water connection warm 1"
Needed pressure: 3 bar dynamic
Water quantity: according to basins dimensions
Tubing to water outlet 2 x DN20
Drainage tube 2 x DN40
Air tube 2 x DN25
2 x basin with false floor
Tubing of the overflow
Accessories/ Options
LED RGB illumination for the basins
Basins with false floor made of ceramics or Corian on demand