Nebulisation of brine solution to create a salty sea climate for steam rooms. The SOLDOS sprays fine nebulised, sterile brine solution into steam rooms. After a short time, you get a salty sea climate in the room. The brine solution is primed out of an air-sealed bag (Politainer), which prevents the contamination of the brine solution with germs from the ambient air. Then the brine is pressed through a very fine nozzle by a high-pressure diaphragm pump and nebulised. Furthermore a disinfection system is integrated. Operation via 3,2" full colour Touch display with a multitude of possibilities:
Operation modes: cyclic-, clock timer- and external control
Week-program for the definition of the individual operation times per day
Combination of the salt spray with light and sound effects
Pressure monitoring for filling level brine and nozzle
Day counter for the indication of a possible necessary disinfection and visual description of this procedure
Technical Data:
Area of application: Steam rooms with a floor space of app. 25 m² (depending on air exchange rate;
Brine consumption at app. 10 h operation/day (system settings 10 min. pause/10 sec. dosing): app. 1 kg / day;
Scope of delivery
Controller with 3,2" Touch installed in housing
Motor diaphragm pump, low noise
Mounting board with console for brine bag
Nozzle stainless steel V4A with cover screen PE
Mounting sleeve and 5 m dosing tube PTFE
Disinfection set with disinfection tablet, mixing bottle and recipient
5 kg sterile brine solution in Politainer (resp. 1 kg for private use)
Design cover
Photo: Nozzle and grommet
To be provided by the builder:
Plants room for the installation of system
Power socket
Points to be considered before the installation:
Before the installation of a SOLDOS all materials have to be checked on their corrosion resistance against the saline mixture of water and air both in the adequate steam cabinet and additionally in the ventilation pipework.
The SOLDOS is not licensed for medical purpose.
Use only pure, disinfected WDT brine solution with a salt concentration of app. 5%. WDT brine solution is delivered in a sterile condition in a closed bag. Outstanding brine solution is affected by bacterial impact and so should not be used.
In order to prevent drainage of the Politainer, the nozzle has to be installed on a higher level than the SOLDOS. If this is not possible a spring loaded non-return valve has to be installed in the dosing tube.
The SOLDOS-V3 is not useful for dry rooms (Tepidarium etc.). For this purpose we recommend to use the SOLDOS-SL or SOLFOG system.
Accessories/ Options:
Push button plate with bonnet for flush mounting
2nd pump and nozzle for cabinets with a bigger surface square of 25 m²