Nebulisation of brine solution to create a salty sea climate for dry rooms (Tepidarium, Relax rooms, Saunas). The SOLDOS-SL is spraying a very fine nebulized, sterile brine solution into dry rooms. After a short time you get a salty sea climate in the room. The brine solution is primed out of an air sealed bag (Politainer) by a peristaltic pump and conveyed to a two-component jet nozzle where it is nebulized very fine by adding compressed air. This brine mist is then sprayed into the room. The Politainer interfolds when the liquid brine solution is taken out. This procedure prevents the contamination of solution with germs of the ambient air. Furthermore a disinfection system is integrated. Operation via 3,2” full color Touch display with a multitude of possibilities:
Operation modes: cyclic-, clock timer- and external control
Week-program for the definition of the individual operation times per day
Combination of the salt spray with light and sound effects
Empty switch for a switch-off of the system when brine will get empty
Day counter for the indication of a possible necessary disinfection and visual description of this procedure
Technical Data:
Area of application: Tepidariums, saunas, salt rooms with a floor space of app. 35 m² (depending on air exchange rate);
Electrical supply: 230 V / AC 50 Hz;
Power supply: 455 W;
Dimensions (W/H/D): 470 x 710 x 240 mm;
Dimensions compressor (W/H/D): 240 x 250 x 160 mm;
Sound emission in one meter distance to the nozzle: 70 dB(A);
Temperature range: +10°C to +35°C;
Protection class: IP44;
Brine consumption at app. 10 h operation/day (system settings 10 min. pause/10 sec. dosing): app. 1 kg / day;
Scope of delivery
Controller with 3,2" Touch installed in housing
Peristaltic pump SA with rpm control for the adjustment of the dosing quantity / salt concentration
Water separator
Mounting board with console for brine bag
Solenoid piston compressor
Two-component jet nozzle stainless steel V4A with cover screen, mounting sleeve, 5 m air tube PE and 5 m brine tube PTFE
Disinfection set with disinfection tab, mixing bottle and recipient
5 kg sterile brine solution in brine bag (resp. 1 kg for private use)
Design cover
Photo 1: Nozzle with mounting sleeve
Photo 2: Compressor
To be provided by the builder
Plants room for the installation of system
Power socket
Points to be considered before the installation:
Before the installation of a SOLDOS all materials have to be checked on their corrosion resistance against the saline mixture of water and air both in the adequate room and additionally in the ventilation pipework.
The SOLDOS is not licensed for medical purpose.
Use only pure, disinfected WDT brine solution with a salt concentration of app. 5%. WDT brine solution is delivered in a sterile condition in a closed bag. Outstanding brine solution is affected by bacterial impact and so should not be used.
Accessories/ Options
Push button plate with bonnet for flush mounting
2nd pump and nozzle for cabinets with a bigger surface square of 35 m²