Foot Bath Sputtering System For 1 Basin

WDT
Contact us
The programme is activated by a push-button. The guest has the choice between a cold or warm water treatment. After pressing the button the filling of the basin starts. It stops when an adjustable water level is reached. Then the bubbling starts automatically for a programmable time. After the lapse of this time the bubbling stops and a dwell time follows. Afterwards the basin is emptied automatically. During the dwell time the bubbling can be restarted before the emptying. During the filling procedure a chlorine solution is dosed to disinfect the whole system (drain-, air piping and basin) and the feet of the user.

Technical Data:

CONTROLLER
  • Electrical supply: 230 V/AC 50 Hz;
  • Power supply: max. 300 W;
  • Dimensions (W/H/D): 350 x 350 x 150 mm;
  • Weight: 2 kg;

WATER PART
  • Water supply: 2 x 3/4" IG;
  • Outlet to the 2 basins: 2 x solenoid valve 3/4";
  • Dimensions (W/H/D): 410 x 440 x 150 mm;
  • Weight: 8 kg;
  • Water consumption according to basins dimensions!

Scope of delivery

Controller consisting of:
  • Micro processor controller in housing
  • Potis for the adjustment of the single parameters (Sputtering time, dwell time...)
  • Pressure switch and pressure measuring device for the regulation of the water level
  • Completely pre-wired on PP board grey

Water part consisting of:
  • 2 x supply (warm/ cold) with pre-filter and ball valve 3/4" female thread
  • Thermo mixer JRG 3/4" with non-return valves
  • 2 x outlet with solenoid valve 3/4" and screwing for the filling
  • Completely tubed and pre-wired on PP board blue
Push button plate 2 fold with bonnet for flush mounting and name plates for the start of the programme.

Peristaltic pump with console and bottle 1,5 l for the disinfection incl. dosing tube and dosing valve

Side channel vacuum blower, 0.20kW 230 V - 50 HZ, IP55 for sputtering effect

Motor-ball valve 2-ways PVC DN32 PTFE/EPM 230 VAC D40 S6 max. 3,5 bar for the automatical drainage of the basin

To be provided by the builder:
  • Plants room for the installation of the control panels
  • Power socket 230 V
  • Water connection cold 3/4"
  • Water connection warm 3/4"
  • Needed pressure: 3 bar dynamic
  • Water quantity: according to basin dimensions
  • Tubing to water outlet DN20
  • Drainage tube DN40
  • Air tube DN25
  • Basin with false floor
  • Tubing of the overflow

Accessories/ Options:
  • LED illumination for the basin
  • Basin with false floor made of ceramics or Corian on demand